RELIABILITY BUILT IN™
close
We've updated our Privacy Policy to support European data protection laws. We also use cookies to give you the best experience on our website. If you continue without changing your cookie settings, we assume that you consent to our use of cookies on this device. You can change your cookie settings at any time but if you do, you may lose some functionality on our website.
Before you continue, please read our new Privacy Policy and familiarize yourself with the terms.
close

B-0800-PA

洗脸盆龙头,枢轴式计量,1/2 NPT-F 进口,玫瑰喷水


单孔单温壁挂式龙头,带抛光镀铬黄铜龙头体、2.2 GPM 玫瑰喷淋出口、计量阀芯、空白转轴式手柄和 1/2" NPT 内螺纹入口。通过 ASME A112.18.1/CSAB125.1、NSF 61-Section 9 和 NSF 372 认证。符合 ADA ANSI/ICC A117.1 要求。

  • 喷嘴流量: 2.2 GPM (8.33 L/min)

  • 最大压力: 125 psi (8.62 bar)

  • 最小压力: 20 psi (1.38 bar)

  • 最高温度: 140 F (60℃)

  • 最低温度: 40 F (4.44℃)

替换零件    部件爆炸
PA-N Quick View
PA-N
用于枢轴动作(Pa 型)计量筒手柄的固定螺母
点击查看详情
016654-45 Quick View
016654-45
VR 螺钉,SS,8-32UN 螺纹 x 1/4" 长度
点击查看详情
PA-B Quick View
PA-B
计量枢轴动作手柄(空),带固定螺母和扳手钻头
点击查看详情
238AB-PA Quick View
238AB-PA
238A 带(空白)枢轴动作手柄的计量筒
点击查看详情
006575-45 Quick View
006575-45
三元乙丙橡胶 O 形圈,内径 0.551 x 厚度 0.070
点击查看详情
B-0103 Quick View
B-0103
RoseSpray 出口,3/8" NPT 外螺纹,2.2 加仑/分钟
点击查看详情
相关产品
B-0800 Quick View
B-0800
计量龙头,单温,1/2" NPT 内螺纹入口,玫瑰喷水式
点击查看详情
B-0800-F10 Quick View
B-0800-F10
计量龙头,单温,1/2" NPT 内螺纹入口,1.0 GPM 玫瑰喷射出口
点击查看详情
报告网站问题